Editorial Board

Professor Okyay Kaynak, Editor-in-Chief

Dept. of Electrical and Electronic Engineering
BogaziciUniversity

Bebek, 34342, Istanbul, TURKEY

T: +90-212-287-2475
F: +90-212-287-24652

E: okyay.kaynak@boun.edu.tr

 

On this page:

 


 

Technical Editors

 

FARHAD AGHILI

Space Exploration

Canadian Space Agency (CSA)
Quebec, J3Y 8Y9, CANADA

farhad.aghili@asc-csa.gc.ca

 

Areas: Modeling and design, robotics, actuators and sensors, intelligent control, space applications, medical and biomedical engineering

 

RIDHA BEN MRAD

Dept. of Mech. and Industrial Eng.

Univ. of Toronto
Ontario, M5S 3G8, CANADA

rbenmrad@mie.utoronto.ca

 

Areas: Motion control, micro-devices and opto-electronics, actuators and sensors

 

FEDERICO CARPI

Sch. of Eng. & Materials Sci.

Queen Mary University of London

London E1 4NS, UK

f.carpi@qmul.ac.uk

 

Areas: Modeling and design, actuators and sensors, biomedical and bioinspired devices, smart materials, polymer artificial muscles, electrical/magnetic systems, non-invasive diagnostics 

         

HAN DING

SKL of DMET

Huazhong Univ. of Sci. and Tech.

Wuhan 430074, CHINA

dinghan@hust.edu.cn

 

Areas: Modeling, design, actuators and sensors, robotics, motion control, manufacturing, micro-devices

HIROSHI FUJIMOTO

Dept. of Advanced Energy

Univ. of Tokyo

Kashiwa, Chiba, 277-8561, JAPAN

fujimoto@k.u-tokyo.ac.jp

 

Areas: Robotics, motion control, modeling, design, automotive systems, applications

HUIJUN GAO

School of Astronautics

Harbin Institute of Technology

Harbin, 150080, P.R. CHINA

huijungao@gmail.com

 

Areas: Intelligent control, robotics, motion control, vibration and noise control; multi-agent cooperative control; flight control; vehicle suspension control; process control 

         

GUIDO HERRMANN

Dept. of Mech. Eng.

Univ. of Bristol

Bristol, BS8 1TR, UK

g.herrmann@bris.ac.uk

 

Areas: Intelligent control, robotics, microdevices, automotive and aerospace systems, HD-drive control, humanoid, networked control

 

KAO-SHING HWANG

Electrical Engineering

National Sun Yat-sen University

Min-Hsiung Chia-Yi, TAIWAN

hwang@ccu.edu.tw

 

Areas: Intelligent control, robotics, motion control, intelligent computing, embedded system, computer vision

 

MAKOTO IWASAKI

Dept. of Computer Sc. and Eng.

Nagoya Inst. of Tech.

Showa, Nagoya 4668555, JAPAN

iwasaki@nitech.ac.jp

 

Areas: Motion control, modeling and design, system integration, vibration and noise control

         

KAM K. LEANG 

Dept. of Mech. Eng.

Univ. of Nevada, Reno

Reno, Nevada 89557-0312, USA

kam@unr.edu

 

Areas: Modeling, actuators and sensors, motion control, MEMS

 

YAOYU LI

Dept. of Mech. Eng.

Univ. of Texas at Dallas

Richardson, TX 75080, USA

yaoyu.li@utdallas.edu

 

Areas: Modeling and design, system integration, motion control,  automotive systems, energy systems, other applications

 

YUNHUA LI

Sch. of Autom. Sci. and Elect. Eng.

Beijing Univ. of Aero. & Astro.

Beijing 100191, CHINA

yhli@buaa.edu.cn

 

Areas: Modeling, design, actuators and sensors, robotics, motion control, automotive systems, vibration and noise control, fluid power

         

GUANGJUN LIU

Dept. of Aerospace Eng.

Ryerson Univ.

Toronto, M5B 2K3 CANADA

gjliu@ryerson.ca

 

Areas: Modeling and design; system integration, motion control, actuators and sensors, intelligent control, robotics

SYLVAIN M. MARTEL

Dept. of Computer & Software

Ecole Poly. of Montreal Eng.

Montreal, H3C 3A7, CANADA

sylvain.martel@polymtl.ca

 

Areas: Robotics, micro/nanodevices, actuators and sensors, wireless brain implants, MRI for minimally invasive medical interventions

MEHRDAD MOALLEM

Mechatronics Syst. Eng.

Simon Fraser Univ., Surrey

Surrey BC, V3T 0A3, CANADA

mmoallem@sfu.ca

 

Areas: Robotics, motion control, energy conversion and harvesting, actuators and sensors, applications 

 

 

REZA MOHEIMANI

Sch. of EECS

Univ. of Newcastle

NSW 2308, AUSTRALIA

Reza.Moheimani@newcastle.edu.au

 

Areas: Vibration and noise control, microdevices, Nano-positioning and nano-robotics,, scanning microscopy, data storage systems

SUBHA C. MUKHOPADHYAY

Sch. of Eng. & Advanced Tech.

Massey Univ. (Turitea)

Palmerston North, NEW ZEALAND

s.c.mukhopadhyay@massey.ac.nz

 

Areas: Actuators and sensors, intelligent control, motion control, modeling and design

 

ROBERTO OBOE

Dept. of Management and Eng.

Univ. of Padova Stradella S.
Nicola, 3 - 36100 Vicenza, ITALY

roberto.oboe@unipd.it

 

Areas: Modeling and design, actuators and sensors, motion control, vibration and noise control, other applications

MARCIO DE QUEIROZ

Dept. of Mech. Eng.

Louisiana State Univ.
Baton Rouge, LA 70803-6413, USA

dequeiroz@me.lsu.edu

 

Areas: Modeling, nonlinear control applications including mechanical, electromechanical, electromagnetic, and aerospace systems

 

EDMOND RICHER

Dept. of Mech. Eng.

Southern Methodist Univ.
Dallas, Texas 75275, USA

richer@lyle.smu.edu

 

Areas: Motion control, robotics, actuators and sensors, biomedical, haptics

 

SUBIR KUMAR SAHA

Dept. of Mech. Eng.

Indian Inst. of Tech. Delhi
Hauz Khas, New Delhi 110 016, INDIA

saha@mech.iitd.ac.in

 

Areas: Modeling, design, system integration, motion control, actuators and sensors, intelligent control, automotive systems 

         

GEORG SCHITTER

Automation and Control Inst.

Vienna Univ. of Tech.
1040 Vienna, AUSTRIA

schitter@acin.tuwien.ac.at

 

Areas: Modeling and design, motion control, actuators and sensors; vibration and noise control; micro devices and opto-electronic systems

 

BIJAN SHIRINZADEH

Dept. of Mech. and Aero. Eng.

Monash Univ.
Clayton VIC 3800, AUSTRALIA

bijan.shirinzadeh@eng.monash.edu.au

 

Areas: Modeling and design, manufacturing, robotics, motion control, actuators and sensors, system integration, intelligent control, micro devices and opto-electronic systems

XIAOBO TAN

Dept. of Elect. and Comp. Eng.

Michigan State Univ.

East Lansing, MI 48824, USA

xbtan@egr.msu.edu

 

Areas: Modeling and design, actuators and sensors, robotics, applications

         

NIKOLAOS TSAGARAKIS

Department of Advanced Robotics

Via Morego 30y

Genova 16163, ITALY

nikos.tsagarakis@iit.it

 

Areas: Humanoid robots, mechanism design, motion and compliance control, compliant actuators, force and tactile sensors, haptic interfaces and exoskeleton systems

SHOBHIT VERMA

KLA.-Tencor Corporation

Freemont, CA 94536, USA

shobhit.verma@gmail.com

 

Areas: -  Modeling and design,  manufacturing, system integration, motion control, actuators and sensors, robotics, automotive systems and opto-electronic systems

JIHONG WANG

Sch. of Engineering

Univ. of Warwick
Coventry CV4 7AL, UK

jihong.wang@warwick.ac.uk

 

Areas: Modeling and design, motion control, actuators and sensors, intelligent control, automotive systems,energy analysis/design of mechatronic systems

         

SHENG QUAN (SHANE) XIE

Dept. of Mech. Eng.

University of Auckland
Auckland City, NEW ZEALAND

s.xie@auckland.ac.nz

 

Areas: Modeling and design, motion control, actuators and sensors, intelligent control, manufacturing, healthcare, medical assistive devices, rehabilitation robotics

ZHENHUA XIONG

School of Mech. Eng.

Shanghai Jiao Tong University
Shanghai, CHINA

mexiong@sjtu.edu.cn

 

Areas: Robotics, manufacturing, motion control, vibration and noise control

WEN JUN (CHRIS) ZHANG

Dept. of Mech. Eng.

Univ. of Saskatchewan
Saskatoon, S7N 5A9, CANADA

chris.zhang@usask.ca

 

Areas: Modeling, design, actuators and sensors, manufacturing, robotics, artronics, bio-mechatronics, resilient systems

         

ZHIGANG ZHU

Grove Sch. of Eng.

City Col. of City Univ. of New York
New York, NY 10031, USA

zhu@cs.ccny.cuny.edu

 

Areas: Actuators and sensors, robotics, intelligent control, machine vision, multimodal sensing

   
         
         
       

Return to Top


Technical Editors retiring in 2013
 

JORDAN M. BERG

Dept. of Mech. Eng.

Texas Tech Univ.

Lubbock, TX 79409-1021, USA

jordan.berg@ttu.edu

 

Oct. 1, 2009 - Sept. 30, 2013

 

 

DARWIN G CALDWELL

Mech. Eng. Dept

Italian Inst. of Tech.

Genoa, 16163,ITALY

darwin.caldwell@iit.it

 

Oct. 1, 2009 - Sept. 30, 2013

 

 

SERGEJ FATIKOW

Dept. of Computing Sci. - AMiR

Univ. of Oldenburg

D-26111 Oldenburg, GERMANY

fatikow@uni-oldenburg.de

 

Oct. 1, 2009 - Sept. 30, 2013

 

JASON J. GU

Elec. and Comp. Eng.

Dalhousie Univ.

Nova Scotia, B3J 2X4, CANADA

Jason.gu@dal.ca

 

Jan. 1, 2009 - Dec. 31, 2012

 

YANGMIN LI

Dept. Elecmech. Eng.

Univ. of Macau

Taipa, Macao SAR

ymli@umac.mo

 

Jan. 1, 2009 - Dec. 31, 2012

 

DAN STOIANOVICI

Urology & Mech. Eng.

Johns Hopkins Univ.
Baltimore, MD 21224,USA

dss@jhu.edu

 

Jan. 1, 2009 - Dec. 31, 2012

 

CHARLES ROBERT KOCH

Dept. of Mech. Eng.

Univ. of Alberta

Edmonton AB,  T6G 2G8 CANADA

bob.koch@ualberta.ca

 

Jan. 1, 2009 - Dec. 31, 2012

 

 

 

ARIANNA MENCIASSI

Scuola Superiore Sant'Anna

P.za Martiri della LibertÓ, 33

56127 Pisa, ITALY

arianna.menciassi@sssup.it

 

Jan. 1, 2009 - Dec. 31, 2012

 

 

MARCIA O'MALLEY

Mech. & Materials Sci.

Rice Univ.
Houston, TX 77005-1892, USA

omalleym@rice.edu

 

Arpil. 1, 2009 - March 31, 2013

 

DONG SUN

Dept. of Manuf. Eng. and Eng, Mgt.

City Univ. of Hong Kong
Kowloon, HONG KONG

medsun@cityu.edu.hk

 

Oct. 1, 2009 - Sept. 30, 2013

 

YU SUN

Dept. of Mech. and Ind. Eng.

Univ. of Toronto
Toronto, Ontario,  M5S 3G8 CANADA

sun@mie.utoronto.ca

 

Oct. 1, 2009 - Sept. 30, 2013

   
       

Return to Top


   

Past Editors-in-Chief

   
         

 

FUMIO HARASHIMA

Inst. Industrial Science

Univ. Tokyo

Tokyo 106, JAPAN

 

IEEE-IES (1996)

 

MASSAYOSHI TOMIZUKA

Dept. Mechanical Eng.

Univ. California

Berkeley, CA 94720, USA

 

ASME-DSCD (1997-1999)

 

TOSHIO FUKUDA

Center for Corp. Res. in Adv. Sci. & Tech.

Nagoya University

Nagoya 464-8602, JAPAN

 

IEEE-RAS (2000-2002)

         

REN C. LOU

Office of the President

National Chung Cheng Univ.

Chia-yi, Taiwan, R.O.C.

 

IEEE-IES (2003-2007)

 

KOK-MENG LEE

Woodruff Sch. of Mechanical Eng.

Georgia Inst. of Tech.

Atlanta, GA 30332-0405, USA

ASME-DSCD (2008-2010); IEEE-RAS (2011-2013)

   
       

Return to Top


Call for nomination of Technical Editors

TMech is seeking enthusiastic and visionary scholars in the field of Mechatronics to serve as Technical Editors. Criteria for TE qualifications include the following:

(1)  TEs should have at least associate professor standing or equivalent. 

(2)  TE candidates should have experience as authors or reviewers recognized by existing TEs of the Journal, and demonstrate promise to be competent of delivering the "IEEE 90-90", i.e. 90% submitted papers completed in 90 days for broad areas within the field of mechatronics.

Members of IEEE/IES, IEEE/RAS and ASME/DSCD, who are interested, should send their qualifications (e.g., papers published in TMech and AIM, and a 100-word description of their motivation), along with the CV (including a full list of journal publications) to Editor-in-Chief Kok-Meng Lee <kokmeng.lee@me.gatech.edu>.  Technical Editor appointment involves the votes of the TMech Management Committee.

Return to Top


http://www.ieee-asme-mechatronics.org/